Moving a flat-screen TV safely means keeping it upright, wrapping the screen in foam, and packing it inside a sized box or a custom crate. Flat-screen TVs are fragile and oddly shaped, so a standard moving box can’t protect one properly during a move.

Why Is Moving a Flat-Screen TV So Difficult?

Flat-screen TVs are some of the most fragile, expensive, and oddly shaped items in a home. A large screen won’t fit into a standard moving box, and loading it into a truck without padding risks cracking the glass.

Hiring professionals who carry the right equipment and materials is the safest way to move a large screen. Alliance Relocation Services packs flat-screen TVs upright in a box as part of its TV and electronics packing service. The team also makes a custom crate cut to fit when a screen is large.

If you plan to pack a TV yourself, the steps below cover how to do it safely.

What Supplies Do You Need to Pack and Move a TV?

Some moving truck rental companies offer kits for packing a large flat-screen TV. You will still need extra materials to protect your screen.

Recommended packing supplies:

  • Foam cushions
  • Furniture pad
  • Mover’s wrap
  • Box tape
  • Flat-screen TV cover
  • Appropriately sized box

How Do You Pack a TV for Moving?

Packing a TV for a move involves five main steps. These are preparing the TV, protecting the screen, packing it into the box, moving it safely in the truck, and unpacking it.

How Do You Prepare a TV for Packing?

Take photos of how your entertainment setup is connected before you disconnect anything. These photos help you reconnect everything correctly in your new home.

Unplug all cords from the back of the TV. Roll the power cord into a coil and place it with the remote in a plastic bag or small container.

If the TV has a stand or legs, remove them with a screwdriver. Lay the TV screen-side down on a towel or blanket on a flat surface, then take off the stand or legs.

Place the screws in the same bag as the power cord and remote. Pack that bag in a separate moving box, or tape it to the outside of the TV box.

How Do You Cover and Protect the TV Screen?

Foam pieces protect the TV and keep it from shifting inside the box. See Packing Fragile Items.

With the TV standing upright, place two foam pieces on the top two corners. Wrap the foam tightly in mover’s wrap to hold it in place, then repeat on the bottom two corners.

Add a furniture pad over the mover’s wrap for extra protection.

How Do You Pack the TV Into the Box?

Stand the TV upright, then slide it into the inner section of the box. Slide the outer section of the box over the exposed end of the TV.

Fill any gaps between the top of the box and the TV with furniture pads, towels, or sheets. This keeps the TV from shifting during the move.

Seal the outer and inner sections of the box together with box tape.

How Do You Move the TV Safely in the Truck?

Keep the TV box upright at all times while loading it into the truck. An upright position limits vibration and bumps that can damage the screen.

If you don’t have two heavy objects nearby to brace the box, tie it down to the rub rails inside the truck.

See The 10 Items Most Likely to Get Damaged in a DIY Move.

How Do You Unpack the TV Gently?

Keep the TV upright while unloading it from the truck, then lean it against a wall until you’re ready to open the box.

Cut the tape with scissors or a box cutter, then pull the outer section away from the inner section.

Ask for an extra pair of hands to help slide the TV out of the inner box once it’s open.

Retrieve the photos you took before disconnecting the system. They help you reconnect everything correctly, especially in a larger home theater setup.

If your move includes a stop in storage, see Protect Your Items in a Storage Unit.

Should You Hire Help for a TV and Home Theater Move?

Weigh the replacement cost of a flat-screen TV against the cost of having it packed by a professional. Alliance Relocation Services packs flat screens and home theater components with insured, background-checked technicians across the United States and Canada.

Request a quote for TV and electronics packing to get an estimate for your move.

Frequently Asked Questions

Can I pack a flat-screen TV in a regular moving box?

A standard moving box rarely fits a large, oddly shaped TV. Use foam cushions, a flat-screen TV cover, and a sized box, or a custom crate for larger screens.

How do you protect the TV screen while packing?

Place foam pieces on the top two corners and the bottom two corners, then hold them in place with mover’s wrap. A furniture pad over the wrap adds extra cushioning.

Should the TV lie flat or stand upright during a move?

Keep the TV upright during loading, transport, and unloading. An upright position limits the vibration and bumps that can damage the screen.

What should I do with the TV’s cords and remote?

Place the power cord, remote, and stand screws together in a bag or small container. Pack them in a separate box, or tape the bag to the outside of the TV box.

Can Alliance Relocation Services pack my TV for me?

Yes, Alliance Relocation Services offers TV and electronics packing with insured, background-checked technicians. This includes packing screens upright in a box or making a custom crate for large TVs.