Moving large appliances starts with disconnecting power, water and gas lines. Next, defrost the refrigerator, secure the washer and dryer drums, and clean the stove and oven. This preparation protects appliances from damage during transport. Alliance Relocation Services handles this work across the United States and Canada, including disconnect, disassembly when necessary and crating.

Why Do Large Appliances Need Special Moving Prep?

Most household items pack easily into boxes. Books, clothing, kitchen utensils and smaller decorations wrap quickly and fit into containers without much trouble.

Large appliances are different. Damage to a washer, refrigerator or stove can lead to expensive repairs or a full replacement.

Alliance Relocation Services prepares appliances for transport, including disconnecting, disassembly when needed, and custom crating to protect the investment. See the appliance disconnect and reconnect service for details on this work.

How Do You Disconnect Appliances Before Movers Arrive?

Many movers skip disconnecting appliances that are still connected to power or gas, such as ovens, stoves and dryers.

Check with your local gas and electricity provider for recommended practices. Alliance Relocation Services recommends hiring skilled professionals to improve safety, since movers lack certification as electricians or technicians for large appliances.

If you disconnect appliances yourself, remove loose items from inside first.

How Do You Defrost a Refrigerator and Freezer Before Moving?

Unplug the refrigerator and freezer at least 24 hours before moving day, after emptying them out. This gives time to check for leaks and fix them before the move.

When you disconnect the waterline, drain it completely. Once the unit is fully defrosted, clean and dry the shelving and interior to discourage mold and mildew.

Clean and dry the drip tray at the bottom of the fridge as well.

How Do You Prepare a Washer and Dryer for a Move?

Look for the original parts that secure the washer and dryer drums at least two months before your move, if possible. Contact the manufacturer for a replacement kit if you no longer have these parts.

Your moving company typically lacks this hardware, so plan ahead. See Moving Your Washer and Dryer.

How Do You Clean and Disconnect a Stove or Oven?

Clean the stove and oven thoroughly before moving. Remove the racks and pack them separately for transit.

Disconnect the appliance completely, especially if it runs on gas. Call your gas company for recommended practices.

Electrical stoves typically need less servicing, but check the electrical requirements before moving. Confirm the stove can be plugged in and turned on once you reach your new home.

See Will Movers Disconnect Your Large Appliances?.

How Do You Secure Appliance Cords for Moving?

Have masking tape and rubber bands ready as you unplug appliances. Wrap the cords neatly and secure them with rubber bands.

Attach the plug to the back of the appliance with masking tape. Avoid leaving loose parts that could cause a trip hazard or get damaged if pulled.

Secure all doors, knobs, cords and extra parts with tape.

What Other Items Need Appliance-Style Prep?

While preparing indoor appliances, take time to prepare outdoor equipment too. This includes a lawnmower, weed wacker, snow blower or motorcycle.

Get Help Moving Large Appliances

Alliance Relocation Services can prepare your appliances safely if a DIY move sounds like too much work. Alliance disconnects, disassembles when necessary and crates appliances to protect them during transport, then can help reassemble and reconnect them at your new residence.

Request a quote to get started, or call 877-242-0409.

Frequently Asked Questions

How far in advance should I unplug my refrigerator before a move?

Unplug and empty the refrigerator and freezer at least 24 hours before moving day. This allows time to defrost fully and check for leaks.

What parts do I need to secure a washer or dryer drum?

Look for the original drum-securing parts that came with your washer and dryer. If you no longer have them, contact the manufacturer for a replacement kit.

Can I disconnect a gas stove or dryer myself?

You can disconnect appliances yourself if you check with your local gas company first and remove loose items from inside. Alliance Relocation Services recommends hiring skilled professionals to improve safety for this work.

What should I do with appliance cords before the move?

Wrap cords neatly and secure them with rubber bands. Tape the plug to the back of the appliance so nothing hangs loose.

Does Alliance Relocation Services help with appliance moving?

Yes. Alliance disconnects, disassembles when necessary and crates appliances at origin, then can help reassemble and reconnect them at the new residence.