Moving a pool table means taking apart the frame, rails, and felt, then loading the heavy slate into a truck sized for the weight. The one-piece slate alone can weigh over 400 pounds. That calls for the right tools, several strong helpers, and a plan from disassembly to reassembly.

Should you hire a professional to move a pool table?

A pool table is a fun addition to a home, but moving one takes planning. Alliance Relocation Services can handle disassembly, lifting, carrying, loading, unloading, and reassembly of the table for you. If you decide to do the job yourself, the steps below cover what the work involves.

How heavy is a pool table slate?

A one-piece pool table slate can weigh over 400 pounds. That weight can cause real injuries to you and your helpers if you are not prepared for it.

What tools do you need to move a pool table?

Gathering the right tools and supplies helps avoid mistakes during disassembly and reassembly. You will need the following:

  • A power drill
  • Safety goggles
  • A carpenter’s level and shims
  • A socket wrench set
  • Phillips and flat-head screwdrivers
  • A staple puller and scraper for removing the felt
  • Individual parts bags and a parts box
  • Enough quilted moving blankets to pad the pieces well

How many people do you need to move a pool table?

Moving a pool table takes real muscle and careful teamwork. Plan on at least 3 to 4 young, fit helpers. They should have some mechanical aptitude to help with disassembly and reassembly. Navigating the table through doorways and hallways takes finesse as well as strength.

What size truck do you need to move a pool table?

An SUV or pickup truck lacks the capacity for this job. Most pool tables measure 7 to 9 feet long and weigh over 1,000 pounds total. Rent a moving truck with a large enclosed cargo area, a walk board, and heavy-duty logistics straps.

Do you need to measure doorways and staircases before moving a pool table?

Yes, measuring doorways, hallways, and staircases helps you avoid surprises on moving day. Most disassembled pool table parts fit easily through a home’s doors, halls, and stairways. Measure ahead of time anyway, especially if renovations happened after the table was first set up. See Alliance Relocation Services’ piano, pool table and clock moving page if stairs are part of your move, since staircases make the job harder.

How do you disassemble a pool table?

Take apart the table step by step.

  • Remove the corner and side ball pockets.
  • Remove the side rails with pliers or a socket wrench.
  • Lift the felt gently from the wood or slate surface using a staple puller and scraper. Avoid stretching or damaging the felt.
  • Remove the hardware with a power drill, then lift the exposed slate or wood from the frame. Have at least two other strong helpers on hand, and lay the pieces on a moving blanket for wrapping.
  • Disassemble the frame and legs last. You may need to turn the table upside down to do this.

Take photos of hardware and joints before disassembly. Pack nuts, bolts, and screws in plastic bags, and label them clearly. This makes reassembly far more manageable.

How do you protect pool table pieces when moving them?

Wrap the pieces in thick quilted moving blankets. Secure the blankets with packing tape or rubber bands so they stay in place. Wrap the slate in bubble wrap, secure it with shrink wrap, and pack it in heavy-duty cartons. Professional crating offers the best protection for the slate slab. See How to Pack Living Room Furniture.

How do you load a pool table slate into a moving truck?

Load the slate upright and perpendicular to the floor. Never lay it flat, since slate cracks far less often this way. Use moving pads to protect the slate in the truck. Secure the slate pieces against the truck’s bulkhead or a wall with at least two heavy-duty logistics straps.

Drive slowly and carefully between homes, even for a short distance. Watch for potholes, speed bumps, and road debris that could make the truck bounce erratically.

What are the risks of moving a pool table yourself?

This is a tremendous amount of work, and DIY pool table moves carry real risks. You or a helper could get injured during the lift. You could drop the heavy slate and break it, or damage your home in the process.

Alliance Relocation Services handles disassembly, lifting, carrying, loading, unloading, and reassembly of pool tables across the United States and Canada. See Hire Professionals to Move These 5 Household Items.

Request your quote from Alliance Relocation Services to weigh the cost of hiring help against doing the job yourself.

Frequently Asked Questions

Why should pool table slate be loaded upright in the moving truck?

Loading the slate upright and perpendicular to the floor keeps it from cracking. Lay the slate flat, and it becomes far more likely to break during transport.

What should you do with pool table hardware before disassembly?

Take photos of the hardware and joints before taking the table apart. Pack the nuts, bolts, and screws in labeled plastic bags. This makes reassembly much easier at the new home.

Why do you need a moving truck instead of an SUV or pickup?

Most pool tables measure 7 to 9 feet long and weigh over 1,000 pounds total. An SUV or pickup lacks the enclosed cargo space, walk board, and heavy-duty logistics straps needed for this size and weight.

What should you do if your home has stairs?

Stairs make moving a pool table significantly harder and riskier. Contact Alliance Relocation Services for a quote if stairs are part of your move.